if 语句格式
if 条件 then Command else Command fi 别忘了这个结尾 |
If语句忘了结尾fi test.sh: line 14: syntax error: unexpected end of fi |
if 的三种条件表达式
if command then if 函数 then |
命令执行成功,等于返回0 (比如grep ,找到匹配) 执行失败,返回非0 (grep,没找到匹配) |
if [ expression_r_r_r ] then |
表达式结果为真,则返回0,if把0值引向then |
if test expression_r_r_r then |
表达式结果为假,则返回非0,if把非0值引向then |
[ ] && ——快捷if
[ -f "/etc/shadow" ] && echo "This computer uses shadow passwors" |
&& 可以理解为then 如果左边的表达式为真则执行右边的语句 |
shell的if与c语言if的功能上的区别
shell if | c语言if |
0为真,走then | 正好相反,非0走then |
不支持整数变量直接if 必须:if [ i –ne 0 ] 但支持字符串变量直接if if [ str ] 如果字符串非0 |
支持变量直接if if (i ) |
=================================以command作为if 条件===================================
以多条command或者函数作为if 条件
echo –n “input:” read user if 多条指令,这些命令之间相当于“and”(与) grep $user /etc/passwd >/tmp/null who -u | grep $user then 上边的指令都执行成功,返回值$?为0,0为真,运行then echo "$user has logged" else 指令执行失败,$?为1,运行else echo "$user has not logged" fi |
# sh test.sh input : macg macg pts/0 May 15 15:55 . 2075 (192.168.1.100) macg has logged # sh test.sh input : ddd ddd has not logged |
以函数作为if条件 (函数就相当于command,函数的优点是其return值可以自定义)
if 以函数作为if条件, getyn then 函数reture值0为真,走then echo " your answer is yes" else 函数return值非0为假,走else echo "your anser is no" fi |
if command 等价于 command+if $?
$ vi testsh.sh #!/bin/sh if cat 111-tmp.txt | grep ting1 then echo found else echo "no found" fi |
$ vi testsh.sh #!/bin/sh cat 111-tmp.txt | grep ting1 if [ $? -eq 0 ] then echo $? echo found else echo $? echo "no found" fi |
$ sh testsh.sh no found |
$ sh testsh.sh 1 no found |
$ vi 111-tmp.txt that is 222file thisting1 is 111file $ sh testsh.sh thisting1 is 111file found |
$ vi 111-tmp.txt that is 222file thisting1 is 111file $ sh testsh.sh thisting1 is 111file 0 found |
========================================以条件表达式作为 if条件=============================
传统if 从句子——以条件表达式作为 if条件
if [ 条件表达式 ]
then
command
command
command
else
command
command
fi
条件表达式
- 文件表达式
if [ -f file ] 如果文件存在
if [ -d ... ] 如果目录存在
if [ -s file ] 如果文件存在且非空
if [ -r file ] 如果文件存在且可读
if [ -w file ] 如果文件存在且可写
if [ -x file ] 如果文件存在且可执行
- 整数变量表达式
if [ int1 -eq int2 ] 如果int1等于int2
if [ int1 -ne int2 ] 如果不等于
if [ int1 -ge int2 ] 如果>=
if [ int1 -gt int2 ] 如果>
if [ int1 -le int2 ] 如果<=
if [ int1 -lt int2 ] 如果<
- 字符串变量表达式
If [ $a = $b ] 如果string1等于string2
字符串允许使用赋值号做等号
if [ $string1 != $string2 ] 如果string1不等于string2
if [ -n $string ] 如果string 非空(非0),返回0(true)
if [ -z $string ] 如果string 为空
if [ $sting ] 如果string 非空,返回0 (和-n类似)
条件表达式引用变量要带$
if [ a = b ] ;then echo equal else echo no equal fi |
[macg@machome ~]$ sh test.sh input a: 5 input b: 5 no equal (等于表达式没比较$a和$b,而是比较和a和b,自然a!=b) |
改正:
if [ $a = $b ] ;then echo equal else echo no equal fi |
[macg@machome ~]$ sh test.sh input a: 5 input b: 5 equal |
-eq -ne -lt -nt只能用于整数,不适用于字符串,字符串等于用赋值号=
[macg@machome ~]$ vi test.sh echo -n "input your choice:" read var if [ $var -eq "yes" ] then echo $var fi [macg@machome ~]$ sh -x test.sh input your choice: y test.sh: line 3: test: y: integer expression_r_r_r expected 期望整数形式,即-eq不支持字符串 |
=放在别的地方是赋值,放在if [ ] 里就是字符串等于,shell里面没有==的,那是c语言的等于
无空格的字符串,可以加" ",也可以不加
[macg@machome ~]$ vi test.sh echo "input a:" read a echo "input is $a" if [ $a = 123 ] ; then echo equal123 fi |
[macg@machome ~]$ sh test.sh input a: 123 input is 123 equal123 |
= 作为等于时,其两边都必须加空格,否则失效
等号也是操作符,必须和其他变量,关键字,用空格格开 (等号做赋值号时正好相反,两边不能有空格)
[macg@machome ~]$ vi test.sh echo "input your choice:" read var if [ $var="yes" ] then echo $var echo "input is correct" else echo $var echo "input error" fi |
[macg@machome ~]$ vi test.sh echo "input your choice:" read var if [ $var = "yes" ] 在等号两边加空格 then echo $var echo "input is correct" else echo $var echo "input error" fi |
[macg@machome ~]$ sh test.sh input your choice: y y input is correct [macg@machome ~]$ sh test.sh input your choice: n n input is correct 输错了也走then,都走then,为什么? 因为if把$var="yes"连读成一个变量,而此变量为空,返回1,则走else |
[macg@machome ~]$ sh test.sh input your choice: y y input error [macg@machome ~]$ sh test.sh input your choice: no no input error 一切正常 |
If [ $ANS ] 等价于 if [ -n $ANS ]
如果字符串变量非空(then) , 空(else)
echo "input your choice:" read ANS if [ $ANS ] then echo no empty else echo empth fi |
[macg@machome ~]$ sh test.sh input your choice: 回车 empth 说明“回车”就是空串 [macg@machome ~]$ sh test.sh input your choice: 34 no empty |
整数条件表达式,大于,小于,shell里没有> 和< ,会被当作尖括号,只有-ge,-gt,-le,lt
[macg@machome ~]$ vi test.sh echo "input a:" read a if [ $a -ge 100 ] ; then echo 3bit else echo 2bit fi |
[macg@machome ~]$ sh test.sh input a: 123 3bit [macg@machome ~]$ sh test.sh input a: 20 2bit |
整数操作符号-ge,-gt,-le,-lt, 别忘了加-
if test $a ge 100 ; then [macg@machome ~]$ sh test.sh test.sh: line 4: test: ge: binary operator expected |
if test $a -ge 100 ; then [macg@machome ~]$ sh test.sh input a: 123 3bit |
============================逻辑表达式=========================================
逻辑非 ! 条件表达式的相反
if [ ! 表达式 ]
if [ ! -d $num ] 如果不存在目录$num
逻辑与 –a 条件表达式的并列
if [ 表达式1 –a 表达式2 ]
逻辑或 -o 条件表达式的或
if [ 表达式1 –o 表达式2 ]
逻辑表达式
- 表达式与前面的= != -d –f –x -ne -eq -lt等合用
- 逻辑符号就正常的接其他表达式,没有任何括号( ),就是并列
if [ -z "$JHHOME" -a -d $HOME/$num ]
- 注意逻辑与-a与逻辑或-o很容易和其他字符串或文件的运算符号搞混了
最常见的赋值形式,赋值前对=两边的变量都进行评测
左边测变量是否为空,右边测目录(值)是否存在(值是否有效)
[macg@mac-home ~]$ vi test.sh : echo "input the num:" read num echo "input is $num" if [ -z "$JHHOME" -a -d $HOME/$num ] 如果变量$JHHOME为空,且$HOME/$num目录存在 then JHHOME=$HOME/$num 则赋值 fi echo "JHHOME is $JHHOME" |
----------------------- [macg@mac-home ~]$ sh test.sh input the num: ppp input is ppp JHHOME is 目录-d $HOME/$num 不存在,所以$JHHOME没被then赋值 |
[macg@mac-home ~]$ mkdir ppp [macg@mac-home ~]$ sh test.sh input the num: ppp input is ppp JHHOME is /home/macg/ppp |
一个-o的例子,其中却揭示了”=”必须两边留空格的问题
echo "input your choice:" read ANS if [ $ANS="Yes" -o $ANS="yes" -o $ANS="y" -o $ANS="Y" ] then ANS="y" else ANS="n" fi echo $ANS |
[macg@machome ~]$ sh test.sh input your choice: n y [macg@machome ~]$ sh test.sh input your choice: no y 为什么输入不是yes,结果仍是y(走then) 因为=被连读了,成了变量$ANS="Yes",而变量又为空,所以走else了 |
[macg@machome ~]$ vi test.sh echo "input your choice:" read ANS echo "input your choice:" read ANS if [ $ANS = "Yes" -o $ANS = "yes" -o $ANS = "y" -o $ANS = "Y" ] then ANS="y" else ANS="n" fi echo $ANS |
[macg@machome ~]$ sh test.sh input your choice: no n [macg@machome ~]$ sh test.sh input your choice: yes y [macg@machome ~]$ sh test.sh input your choice: y y |
===================以 test 条件表达式 作为if条件===================================
if test $num -eq 0 等价于 if [ $num –eq 0 ]
test 表达式,没有 [ ]
if test $num -eq 0
then
echo "try again"
else
echo "good"
fi
man test
[macg@machome ~]$ man test [(1) User Commands [(1) SYNOPSIS test EXPRESSION [ EXPRESSION ] [-n] STRING the length of STRING is nonzero -n和直接$str都是非0条件 -z STRING the length of STRING is zero STRING1 = STRING2 the strings are equal STRING1 != STRING2 the strings are not equal INTEGER1 -eq INTEGER2 INTEGER1 is equal to INTEGER2 INTEGER1 -ge INTEGER2 INTEGER1 is greater than or equal to INTEGER2 INTEGER1 -gt INTEGER2 INTEGER1 is greater than INTEGER2 INTEGER1 -le INTEGER2 INTEGER1 is less than or equal to INTEGER2 INTEGER1 -lt INTEGER2 INTEGER1 is less than INTEGER2 INTEGER1 -ne INTEGER2 INTEGER1 is not equal to INTEGER2 FILE1 -nt FILE2 FILE1 is newer (modification date) than FILE2 FILE1 -ot FILE2 FILE1 is older than FILE2 -b FILE FILE exists and is block special -c FILE FILE exists and is character special -d FILE FILE exists and is a directory -e FILE FILE exists 文件存在 -f FILE FILE exists and is a regular file 文件存在且是普通文件 -h FILE FILE exists and is a symbolic link (same as -L) -L FILE FILE exists and is a symbolic link (same as -h) -G FILE FILE exists and is owned by the effective group ID -O FILE FILE exists and is owned by the effective user ID -p FILE FILE exists and is a named pipe -s FILE FILE exists and has a size greater than zero -S FILE FILE exists and is a socket -w FILE FILE exists and is writable -x FILE FILE exists and is executable |
======================if简化语句=================================
最常用的简化if语句
&& 如果是“前面”,则“后面” [ -f /var/run/dhcpd.pid ] && rm /var/run/dhcpd.pid 检查 文件是否存在,如果存在就删掉 |
|| 如果不是“前面”,则后面 [ -f /usr/sbin/dhcpd ] || exit 0 检验文件是否存在,如果存在就退出 |
用简化 if 和$1,$2,$3来检测参数,不合理就调用help
[ -z "$1" ] && help 如果第一个参数不存在(-z 字符串长度为0 )
[ "$1" = "-h" ] && help 如果第一个参数是-h,就显示help
例子
#!/bin/sh
[ -f "/etc/sysconfig/network-scripts/ifcfg-eth0" ] && rm -f /etc/sysconfig/network-scripts/ifcfg-eth0
cp ifcfg-eth0.bridge /etc/sysconfig/network-scripts/ifcfg-eth0
[ -f "/etc/sysconfig/network-scripts/ifcfg-eth1" ] && rm -f /etc/sysconfig/network-scripts/ifcfg-eth1
cp ifcfg-eth1.bridge /etc/sysconfig/network-scripts/ifcfg-eth1
[ -f "/etc/sysconfig/network-scripts/ifcfg-eth0:1" ] && rm -f /etc/sysconfig/network-scripts/ifcfg-eth0:1
文献出自:http://blog.csdn.net/buutterfly/article/details/6615162
相关推荐
本篇文章主要介绍了详解Shell编程之if语句实战(小结),小编觉得挺不错的,现在分享给大家,也给大家做个参考。一起跟随小编过来看看吧
详细介绍了shell编程中的if case 语句,附有详细的例子要是截图。
linux shell编程if语句内判断参数详解 主要讲了 shll中if语句里可用参数,非常详细
Linux运维-3.Shell编程-12 shell编程-137if语句1.avi
3.Shell编程之IF条件语句各种案例演练.mp4 4.使用if条件语句编写MySQL备份脚本.mp4 5.Shell编程之LAMP一键安装脚本实战.mp4 6.For循环及实战批量远程命令脚本.mp4 7.While条件语句企业案例列表读取_0.mp4 8.Shell...
Linux运维-3.Shell编程-12 shell编程-140多分支if语句.avi
Shell编程-流程控制-if语句
Linux运维-3.Shell编程-12 shell编程-139双分支if语句2.avi
Linux运维-3.Shell编程-12 shell编程-138双分支if语句1.avi
11.1 Shell编程-正则表达式.mp4 ...11.5.1 Shell编程-流程控制-if语句.mp4 11.5.2 Shell编程-流程控制-case语句.mp4 11.5.3 Shell编程-流程控制-for循环.mp4 11.5.4 Shell编程-流程控制-while循环与until循环.mp4
其实case语句还是很好理解的,在shell编程中,if语句有它的语法,函数也有它的语法,那么在我们shell编程中的case语句也是有它的语法的,如下: case 变量名 in 值1) 指令1 ;; 值2) 指令2 ;; 值3) 指令3 ;...
第四部分 基础shell编程 第16章 shell脚本介绍 151 16.1 使用shell脚本的原因 151 16.2 脚本内容 151 16.3 运行一段脚本 152 16.4 小结 153 第17章 条件测试 154 17.1 测试文件状态 154 17.2 测试时使用逻辑操作符 ...
面向过程:顺序执行选择执行: if, case循环执行: for, while, until 一、for语句 格式: for 变量 in 列表;do 语句1; 语句2; … done 例1、写一个脚本,添加10个用户,并让每个用户的密码同用户名】 代码...
主要介绍了shell脚本编程之if语句学习笔记,本文先是给出了程序代码,然后详细的分解了第句代码的作用,需要的朋友可以参考下
主要介绍了Linux shell脚本编程if语句的使用方法,大家参考使用吧
day2判断大小以及if条件语句shell编程.txt
第四部分 基础shell编程 第16章 shell脚本介绍 151 16.1 使用shell脚本的原因 151 16.2 脚本内容 151 16.3 运行一段脚本 152 16.4 小结 153 第17章 条件测试 154 17.1 测试文件状态 154 17.2 测试时使用逻辑操作符 ...
《跟老男孩学Linux运维:Shell编程实战》第二部分为第5章~第8章,着重讲解变量的多种数值运算、条件测试与比较、if条件判断语句、Shell函数等相关的知识。《跟老男孩学Linux运维:Shell编程实战》第三部分为第9章~第...